Insulation Sleeve

Weshare Insulating sleeve is a kind of insulating material. It is a general term. Electrical insulation casings include fiberglass casings, (yellow wax tubes, self-extinguishing tubes, silicone rubber insulating casings, etc.), heat shrink tubes, PVC casings, etc.

The function of insulating sleeve:

1. Eliminate short circuit faults caused by mice, snakes and other small animals

2. Prevent the corrosion of busbars by chemicals such as acids, alkalis, and salts.

3. Prevent maintenance personnel from accidentally entering the live gap and causing accidental injuries.

4. Adapt to the development trend of miniaturization of switch cabinets

5. Solve the problem of phase insulation of busbar slots

Heat shrink tubing, also known as heat shrink protective tubing, provides insulation protection for wires, cables and wire terminals. It has high temperature shrinkage, soft flame retardancy, insulation and corrosion protection, etc., and is widely used for insulation protection of various wire harnesses, solder joints, inductors, and rust and corrosion prevention of metal tubes and rods.

Heat shrinkable tube has flame retardant, insulating and temperature resistance properties. Heat shrinkable tube is a special polyolefin heat shrinkable tube, also called EVA material.

It is soft and elastic. It will shrink when heated (125 degrees), and is widely used in the insulation protection of various wire harnesses, solder joints, and inductors, as well as the rust and corrosion prevention of metal pipes and rods.

It is often used on wire joints. Choose a suitable heat shrink tube, put it on the wire joint, heat it with a hot air gun, the heat shrink tube will shrink, and the joint will be secure.

The function of heat shrinkable sleeves: generally used for packaging insulation in electronics, electrical appliances, batteries, etc.

By using a hot air blower, it can be compressed and perform functions such as insulation and protection.

Heat shrink sleeve heating method. Use a hair dryer, hot air blower, or heat shrink machine.

Silicone:

Silicone is a high-temperature stable, soft and durable synthetic rubber favored for its excellent resistance to heat and chemicals. Silicone has excellent elasticity and resilience and can adapt to many shapes of pipes and equipment. At the same time, silicone has good insulation properties and can effectively block current and heat conduction, protecting equipment from high temperatures and other external environmental influences.

Fiberglass:

Fiberglass is a composite material composed of fine glass fibers that is widely used in engineering and construction due to its high strength and high temperature resistance. The addition of glass fiber enhances the tensile strength and wear resistance of the silicone sleeve, allowing it to withstand greater physical pressure and mechanical stress.

The combination of these two materials makes silicone fiberglass sleeve an ideal high temperature protection and insulation material. Not only can it resist thermal radiation and heat conduction in high-temperature environments, but it can also protect equipment and pipelines under harsh conditions and extend their service life.