Electrical Laminated Wood for Oil Transformer Insulation

 

Electrical Laminated wood for oil transformer insulation usually uses high-quality hardwoods such as oak, walnut, etc. as the base material. During the production process, the wood is first dried and sterilized to ensure the quality and stability of the wood.

A strong laminate is then created by stacking layers of wood sheets cross-stacked and adding a special insulating resin between the sheets. This process gives electrical laminated wood its outstanding.

 

Product advantages

Project	Description
High mechanical strength	The laminated structure ensures it has good load - bearing capacity even in high - pressure environments.
Good electrical insulation performance	High insulation grade, suitable for high - voltage electrical equipment.
Strong dimensional stability	Not easy to deform, with good resistance to humidity and heat, suitable for various environments.
Oil - resistant and corrosion - resistant	Can work in insulating oil for a long time, with high chemical stability.
Good machinability	Can be sawn, drilled, milled, etc., suitable for processing various structural components.

 

 

 

Veneer Maximum Specification:4000x3000x120

Veneer Maximum Specification: (length x width x thickness)

Veneer Usual Specification:

3000x1500x(10-120)

2400x2000x(10-120)

Veneer Usual Specification:

(length x width x thickness)

X-Shape Pressure Ring Maximum Diameter：3000

 

 

Packaged in wooden crates, wooden framed cases or other strong enough materials covered with moisture-proof materialoutside.

Gross weight of each package not exceeds 3000kgs.

 

 

Products should be stored in a clean and dry room with temperature not exceeding 40℃ and should be laid flat wise on a stepping-board which is at least 50mm from the ground, never close to fre source, heat source and protected against moisture.

 

 

Electrical Laminated wood for oil transformer insulation usually uses high-quality hardwoods such as oak, walnut, etc. as the base material. During the production process, the wood is first dried and sterilized to ensure the quality and stability of the wood. A strong laminate is then created by stacking layers of wood sheets cross-stacked and adding a special insulating resin between the sheets. This process gives electrical laminated wood its outstanding.

 

 

1. Manufacturer Place your order directly to the factory, no intermediate cost, more fast delivery ,better service and economical cost.

2. Strict QC inspection Good quality is top important during cooperation. We will make QC inspection strictly before ship out to make sure every piece stayed in a good condition. If any problems made by us after you received cases then we will full responsible to compensate you.

3. Stable Supply As a manufacturer with strong ability ,we have enough stock to meet your needs.

4. Fast delivery Enough stock in the warehouse, normal order can be delivery in 20-30days.

 

 

 

Hot Tags: electrical laminated wood for oil transformer insulation, China electrical laminated wood for oil transformer insulation suppliers, laminated combinations, laminated area, laminated offer, bulk laminates, laminated panels, laminated knowledge